TDN Series Nitrogen Dryer
The TDN series nitrogen dryer is a high-end drying machine specifically developed for optical and high-precision injection molding applications. It uses high-purity nitrogen gas with a concentration exceeding 98% to dry materials, effectively reducing oxidation, yellowing, and moisture-related defects, thereby significantly improving product yield. This series of dryers is equipped with a US-made nitrogen generator, Japanese high-efficiency filters (0.3 μm × 99.99%), and a fully enclosed nitrogen circulation system, ensuring ultra-clean, ultra-low-energy operation. In addition, the nitrogen dryer helps extend screw carbonization time and reduce maintenance costs. It can also be optionally converted into a standard dehumidifying dryer, further enhancing the equipment's flexibility.
Features
- 1. Be full of high concentration nitrogen, above 98%, to improve the quality of molding.
- 2. American original nitrogen generator.
- 3. Reduce product yellowing during molding, improve the quality of the product.
- 4. Material in a whole sealing, not suffering from the external environment.
- 5. Dryer hopper installed above the injection machine(below 20kg).
- 6. Delaying the carbonization time of make-up machine screws reduces maintenance costs for the machine.
- 7. Apply dehumidifying air with compression air, a heatless regeneration principle from Japan.
- 8. The equipment cleans the powder optically.
- 9. Delivery nitrogen in close system.·Ultralow energy consumption.
- 10. Multiple protective equipment.
- 11. Also, it can wipe off nitrogen equipment and use it as a dehumidification dryer(option).
Product Parameters
| Model | TDN-10C | TDN-20C | |
| Capacity(0.6kg/hr) | Kg | 10 | 20 |
| Dry air capacity | m^3/hr | 20 | 30 |
| Concentration | % | 98 | |
| Drytemperature | C | 70-160 | |
| Dry blower | kW | 0.2 | 0.2 |
| Dryheater | kW | 1.8 | 1.8 |
| Storage volume | Lr | 40 | |
| Feed blower | kW | 1.1 | 1.1 |
| Feed condition | Storage to hopper:Φ38PVChosepipe,2m horizontal | ||
| Compress air condition | More than 0.6mpa*20Lr/min | ||
| Power380V/50Hz | kw | 3.3 | 3.3 |
Model Display
