Uncategorized

AD Series AC Servo Injection Robots

Advantages: High efficiency, High Precision, Reduce Cost, High Safety.
Injection mould clamping force range:100~300ton
Single-axis AC servo robots are widely used in horizontal injection molding machines with clamping forces of 100 tons to 300 tons.

MEW Series AC Servo Injection Robots

The Three/Five Axis AC Servo Driven Robots are well-suited for horizontal injection molding machines ranging from 75T to 1300T. They are designed for the efficient removal of finished products and sprues, particularly those with elevated demands for appearance and precision.

Six Axis Industrial Robots

The six-axis industrial robot has a lightweight body, an arm length of 715mm/912mm/1450mm/1813mm, and can bear a load of 7-35kg. The standard cycle time is less than 0.36 seconds, which meets the pursuit of maximum output in the shortest cycle time. The floor area is 180mmx180mm. It delivers maximum performance with a minimum footprint. Minimum working radius: 145.6 mm, reducing the footprint of the base space and ensuring a compact layout. It is mainly used in high-precision and precision production scenarios such as 3C electronics, and is used in assembly, pick and place, loading and unloading, tool operations, etc.

Mold Temperature Controller

As an essential auxiliary equipment, Topstar's new fourth-generation mold temperature controller has standard functions such as fast heating, stable temperature, and low water leakage. It can meet the needs of industry customers for intelligent and digital upgrades, solve the temperature control problem of injection molding production, and has a temperature control accuracy of ±0.1℃, which improves the temperature control efficiency by 10% and increases the service life by 40%.

Auto Cooling System

Topstar's cooling system is divided into two types. The water chiller uses a shell-and-tube condenser, which has fast heat conduction and good heat dissipation effect. It can provide chilled water at 5~35℃, and the low-temperature type can be as low as 3℃. The air chiller uses a fin-type condenser, which has fast heat conduction and good heat dissipation effect and does not require cooling water. It can provide chilled water at 5~35℃, and the low-temperature type can be as low as 3℃.

MDE Series AC Servo Injection Robots

The Topstar MDE series 3axis/5axis AC servo injection molding robots are high-precision, high-speed automated robotic arm solutions designed specifically for 30 to 550-ton injection molding machines. This series of injection molding robots features a robust Q235 steel arm structure, AC servo drive technology, and an intelligent control system, enabling superior positioning accuracy, fast cycle times, and excellent energy efficiency. The MDE series supports MODBUS RTU communication, multi-axis flexible motion control, and the Topstar Link remote monitoring platform, allowing for automated part removal and insert molding, making it ideal for efficient and intelligent factories.

T6L Series Drilling Centre

MBW Series AC Servo Injection Robots

The Three/Five Axis AC Servo Driven Robots are well-suited for horizontal injection molding machines ranging from 75T to 1300T. These robots are specifically designed for the removal of finished products and sprues, catering to applications with elevated demands for both appearance and precision.

Sprue Picker Injection Robot

Advantages: high efficiency, high precision, reduced cost, high safety. Injection molding clamping force range: 80~150 tons. Swing arm manipulators are widely used in horizontal injection molding machines of 50T~250T. They can quickly remove runners, runners, and finished products from the injection molding machine mold, and place the runners or runners next to the mold.

HDW Series Injection Robots

The Three Axis AC Servo Driven Robots are highly suitable for horizontal injection molding machines within the 75T to 1300T clamping force range. These injection molding robots efficiently extract finished products and sprues from the molding process. Their application is particularly crucial in scenarios where heightened standards for appearance and precision are paramount.

Parallel Multi-Joint Robot

It realizes the fast following, grabbing and placing of the conveyor belt, which is widely used in food, automobile and other industries; it has the characteristics of large load, fast speed and stable structure.

Metering & Mixing Machines

Metering and mixing machines can accurately proportion and uniformly mix different raw materials before they enter the injection molding machine, providing a stable supply of material to the machine. Topstar's metering and mixing machines provide precise material metering, uniform mixing, and stable feeding for injection molding and extrusion processes. They feature a stainless steel structure, intelligent control system, and modular design, ensuring contamination-free operation, reduced material waste, and consistent product quality. These metering and mixing machines are compatible with various applications, including virgin materials, recycled materials, and color masterbatches, improving injection molding efficiency, reducing costs, and enabling reliable and repeatable production.

Granulating and Recycling System

Topstar’s Granulator series includes low-speed soundproof, middle-speed, powerful, and powerful soundproof granulator machines. Mainly used for crushing nozzle materials at the injection molding machine side. It is suitable for recycling all kinds of hard and brittle plastic nozzles. It is especially suitable for crushing and recycling hard nozzle materials such as PC, nylon, and ABS. It adopts a screen-less design, and the crushed particles are even, and the dust content is low. Very rarely, the feed hopper adopts a double-layer sound-insulation design; the inner layer is made of stainless steel, and it has a visual material window.