Home / What Cooling Equipment Should You Use for a Mold Temperature Controller Without a Cooling Tower?

What Cooling Equipment Should You Use for a Mold Temperature Controller Without a Cooling Tower?

2026/11/18 By le zhan

What Cooling Equipment Should You Use for a Mold Temperature Controller Without a Cooling Tower

If your factory has a water-cooled mold temperature controller but no cooling tower, you need to understand how these two pieces of equipment work together when selecting the right cooling equipment. The mold temperature controller requires a stable supply of cooling water to remove heat from the mold, while the chiller transfers that heat to the surrounding environment. Without a cooling tower or dedicated condensate equipment, an air-cooled chiller is typically the more practical choice. However, its cooling capacity, operating temperature, and installation environment must still meet actual production requirements.

Selecting Cooling Equipment: What Is the Difference Between Process Cooling and Chiller Heat Dissipation?

Before selecting a chiller, it is necessary to distinguish between two different cooling requirements. Mold temperature controllers require a supply of cooling water to remove excess heat from the mold circuit; at the same time, the chiller itself requires an independent method to dissipate the heat absorbed from the process. Although both use water, their purposes differ and may require different equipment. Clarifying this distinction helps determine which type of cooling equipment to select.

What Is the Difference Between Process Cooling and Chiller Heat Dissipation

What Kind of Cooling Equipment Does a Mold Temperature Controller Require?

Water-based mold temperature controllers maintain the required mold temperature by circulating a heat transfer medium through the mold. During production, the mold transfers heat to the circulating medium. When the temperature exceeds the set target, the mold temperature controller activates its cooling circuit to remove the excess heat.

To do this, the mold temperature controller requires a suitable cooling water source with sufficient flow rate and an appropriate supply temperature. If the factory’s existing tap water cannot meet the required cooling conditions, an injection molding chiller can provide a more stable cooling-water supply.

The mold temperature controller’s requirements do not determine whether the chiller should be air-cooled or water-cooled. This choice depends on how the chiller itself dissipates the heat removed from the process.

Why Do Water-Cooled Chillers Require a Separate Cooling Water Circuit?

Water-cooled chillers consist of two distinct water circuits. One circuit supplies chilled water to the mold temperature controller. In contrast, the condenser water circuit removes heat from the chiller and transfers it to a cooling tower or other suitable heat dissipation system.

If the condenser receives cooling water at an inappropriate temperature or with insufficient flow, it cannot dissipate heat effectively. Condensing temperature and pressure may rise, which could trigger high-pressure protection mechanisms or reduce cooling performance. Without a dedicated condenser water circulation system, the unit often requires additional infrastructure support to operate reliably.

Which cooling equipment should be chosen when there is no cooling tower?

Once engineers clearly define the heat dissipation requirements, equipment selection becomes much easier. For plants without a cooling tower or a dedicated condensate recirculation system, air-cooled chillers are a more suitable choice. They do not require an external cooling water circuit on the condenser side, while still providing controlled chilled water for the production process.

Which cooling equipment should be chosen when there is no cooling tower

Why Are Air-Cooled Chillers Usually the Better Choice?

Air-cooled chillers discharge condenser heat directly into the surrounding air, making them ideal for installation environments without an external cooling water source. They also eliminate the need for cooling towers and complex water distribution systems.

For factories using water-cooled mold temperature controllers, this configuration is relatively straightforward: the air-cooled chiller provides the required cooling water, while the mold temperature controller circulates and regulates the process water according to the mold’s specific requirements. Of course, this does not mean that air-cooled chillers are suitable for all locations. Since their condensers release heat into the factory environment, the installation area must have good ventilation and sufficient space for heat dissipation.

Why Are Air-Cooled Chillers Usually the Better Choice

What on-site conditions should be verified before selecting cooling equipment?

The next step is to assess the factory’s actual environment, rather than simply selecting a unit based on the chiller’s rated capacity. At a minimum, the following parameters must be verified: maximum ambient temperature, ventilation conditions, available installation space, required cooling water temperature, concurrent heat load, water flow rate, and pump pressure.

For air-cooled chillers, ambient temperature is particularly critical because the condenser relies on the surrounding air to dissipate heat. If hot air accumulates around the unit or poor ventilation limits airflow in the installation area, the unit may not cool effectively.

Furthermore, when determining cooling water temperature requirements, it is essential to consider the mold temperature controller’s specific needs as part of a comprehensive assessment. A lower mold temperature does not necessarily mean that the smallest chiller available on the market will suffice. Engineers must evaluate the required temperature, heat load, circulation flow rate, and operating conditions holistically as part of an integrated system.

What on-site conditions should be verified before selecting cooling equipment

Understanding Specific Selection Scenarios Through a Case Study

Take a certain customer as an example: He owns a water-cooled mold temperature controller, but his factory does not have a cooling tower. For cost reasons, he might prefer a small water-cooled chiller because its unit price appears lower. However, this approach focuses solely on the equipment price while ignoring the factory’s actual utility infrastructure.

If the factory lacks an external cooling water system on the condenser side, technicians may need to install additional infrastructure during setup or operate the equipment under unsuitable conditions. In contrast, selecting a properly sized air-cooled chiller eliminates the need for a cooling tower, thereby simplifying the cooling system layout. Therefore, Topstar provides various configuration options—including air-cooled and water-cooled models—based on the customer’s existing plant utilities and actual production requirements.

When selecting equipment for our customers, we follow this process: define mold temperature requirements → calculate cooling load → verify water flow rate and pressure → assess on-site conditions → determine the appropriate cooling method.

How Should You Select the Right Cooling Equipment for a Specific Application?

The key issue isn’t simply whether a mold temperature controller requires water, but how that water is cooled and how the removed heat is dissipated. Once that’s clear, selecting the right equipment becomes straightforward.

For factories without cooling towers, an air-cooled chiller is generally the first choice; it discharges heat directly into the surrounding air without requiring an additional condensate recirculation loop. Topstar designs its air-cooled chillers for flexible installation, making them ideal for locations without an external cooling water source.

If a factory has a well-established external cooling water system—such as one equipped with a cooling tower and the corresponding recirculation infrastructure—a water-cooled chiller may be considered. However, you should never choose water-cooled equipment simply because a municipal water supply is available.

Before finalizing the configuration of an injection molding chiller, you also need to clarify the mold temperature requirements, cooling load, water temperature, flow rate, pressure, ambient temperature, ventilation conditions, and the availability of existing utility infrastructure. Only then can you ensure that the cooling system effectively supports stable mold temperature control.

 

 

Prev: How Can Fine Dust on Resin Pellets Be Removed Before Precision Optical Molding?

Next: Not Next

TRENDING POSTS

HOT TOPIC

Get A Quick Quote